Balcony Shading System
Featuring Symphony Duel Cell Insulating Honeycomb Fabric

| Colors | Measuring Instructions | Installation Instructions

Measuring and Mounting

---

< Back

Inside Mount Only
Use a steel tape to measure the opening at three different places, and use the narrowest dimension when ordering. Be exact! The factory will make the shade narrower so that it will not rub against the window casing. Measure the height of the window from the top (Soffit) down to the sill.

Balcony Shades are for inside applications only.

Minimum required for installation: 1 1/4 inches

Minimum flush Inside mounting surface: 2 1/4 inches

The widest width of the window cannot exceed the narrowest width of the window by more than 3/8 inch.

This shade can be used in horizontal and angled applications 0 to 75 degrees:
Minimum Width 15 inches	Maximum Width 36 inches
Minimum Length 12 inches	Maximum Length 96 inches
Total shade area must not exceed 24 square feet

Angled Applications 15 to 75 degrees:
Minimum Width 15 inches	Maximum Width 36 inches
Minimum Length 12 inches	Maximum Length 96 inches
Total shades area must not exceed 24 square feet

Balcony Vertical Applications
This shade can also be used in vertical applications 75 to 90 degrees:
Minimum Width 15 inches	Maximum Width 48 inches
Minimum Length 12 inches	Maximum Length 96 inches
Total shades area must not exceed 18 square feet

Balcony shades can be mounted on their side. Use the vertical measurement as your width (max. 36") and the horizontal measurement as your length. (max. 48")